Installation is as easy as applying a standard commercial wallcovering. Walltalkers can be hung horizontally or vertically, to allow for optimum writing/projection area as required. Snap-on trims, trays and end caps can be used to finish edges, and should be installed using the clips provided once the Walltalkers surface has been installed. Walltalkers should be installed using Tektura's Tekfix VOV adhesive.
Maintenance
For writing, we recommend the use of Dry Erase Marker pens for best results. Pen kits are available from Tektura PLC.
Do not use ballpoint pens or other sharp pointed writing instruments on the Walltalkers surface
For regular cleaning, we recommend the use of Dry Erase Spray Cleaner for best results. Use non-abrasive cleaners. Rinse surfaces thoroughly with water after every cleaning.
Permanent markings may be removed with alcohol or by writing over the markings with a Dry Marker pen, then wiping clean.
